37
OPERATING THE SWEEPER
Precautions
- The sweeper should only be used by competent and authorised personnel.
- Always remove the key and apply the parking brake by the pedal 5 f g.1 and lock it by the handle 9, f g. 1 when leaving
the sweeper unattended.
- Never park the sweeper on a slope.
Warning!
Check the level of electrolyte in the batteries before starting to use the sweeper.
Starting work
- Check if the brushes are lifted from the ground (lever 10 - knob 13 f g.1).
- Check if the brake pedal 5 (f g.1) is unlocked.
Warning!
Press on the pedal to unlock it.
- Insert the key in the switch 1 f g.1 and turn it clockwise to power on the electrical circuits.
- Insert the vacuum fan and the turning of the brushes by the switch 8 f g.1 on position .”B” and the switch 6
f g.1 on position .”C”
- Lower the brushes. (see points 10-13 f g.1)
- Select the drive direction by the switch 7 (f g.1) and press gradualy on the accelerator pedal 12 (f g.1).
ENGLISH
To Next Page
Loading...
