35
3535
35
12. Troubleshooting16. Alarms
Incubator View Window is opened.
Be sure to cover the window.
1
Short of water. Please add water.
2
1. You started incubation
not from the PC but from the incubator.
In this case, the data can be different from
the incubator.
2. When temperature or humidity get out of the limits,
it alarms continuously even if it returns to normal
setting extent.
It only can be cancelled with "Off" button.
3
Some error occurred in air circulation fan.
Please contact to service center.
4
Some error occurred in temperature sensor.
Please contract to service center.
5
Some error occurred in temperature sensor.
Please contact to service center.
6
1
2
To Next Page
Loading...
