RDL MCM-030 - Page 2

DECLARATIONS
This meter complies with Class B (1%) to EN50470 1-3
MID Approval Certificate No. 0120/SGS0184
This meter is intended to be installed in a Mechanical Environment ‘M1’ with Shock and
Vibrations of low significance, as per 2004/22/EC Directive.
This meter is intended to be installed in electromagnetic Environment ‘E2’, as per 2004/22/
EC Directive.
This meter is intended for Indoor use only.
This meter is intended for Non Condensing humidity.
Note that this meter is sealed and there are no user serviceable parts and no user
adjustments, other than the Landlord / Meter Owner settings of the metering functions and
tariffs. The maintenance and repair of this meter is only permissible by RDL Meters Ltd.
Guarantee
This meter is guaranteed for a period of three years from the date of purchase, subject to the
following guarantee conditions:
This meter is covered by RDL (Meters) Ltd for parts and labour.
This guarantee will not cover any Consequential losses.
This guarantee will be void under any of the following conditions:
 • Removalofoneorbothsealstothecaseandterminalcover.
 • Themeterhasnotbeeninstalledbyacompetent,qualiedelectriciantostandards
that satisfy the requirements of the current Institute of Electrical Engineers (IEE).
 • Themeterhasbeenincorrectlyinstalled.
 • Themeterhasbeensubjecttoaloadofgreaterthan100Amps.
 • Themeterhasbeentamperedwith,toobtainfreeelectricity.
If returning the meter, please contact RDL (Meters) Ltd. to report the return and to arrange
an RMA (Return Merchandise Authorisation) number. Make sure that the meter is carefully
packed.