RDL MCM-030 - Introduction; Table of Contents

METER MODE
CONTENTS PAGE NO.
1. INTRODUCTION 2
1.1 Overview 2
2. TECHNICAL DATA 2
2.1 Meter LED & Power
Registration Security 2
2.2 Main Contactor 2
2.3 Power Supply 2
2.4 Metrology 2
2.5 Environmental 3
2.6 Dimensions 3
3. NORMAL FUNCTIONAL OPERATION 3
3.1 Normal Operation Display 3
3.2 Additional Displayed
Information 3 & 4
3.3 Standing Charge Collection 4
3.4 Rate Switching 4
3.5 Disconnection 4
3.5.1 No Remaining Credit 4
3.5.2 Reverse Energy Detection 4
3.6 Emergency Credit 5
3.6.1 Invocation 5
3.6.2 Reduction 5
3.6.3 Expiry 5
3.7 Prepayment Card Tokens 5
3.7.1 Valid Cards 5 & 6
3.7.2 Card Errors 6
3.7.3 Emergency Credit
Repayment 6
4. COMMAND CARD PROGRAMMING 6
4.1 Programming Method 6 & 7
4.2 Factory Defaults Reset 8
4.3 Date and Time 8
4.4 Zero Credit 8
4.5 Set Credit 8
4.6 Emergency Credit Value 8
4.7 Emergency Credit Available
Point 8
4.8 Cost per Unit of Electricity
for Rate 1 and 2 8
4.9 Standing Charge per 24 hours 8
4.10 Operation Mode Meter or Timer 8
4.11 Area Code 8
5. APPENDIX
5.1 Starting Current 8
5.2 Wiring Diagram and
Mounting Template 8 & 9
TIMER MODE
CONTENTS PAGE NO.
1. INTRODUCTION 10
1.1 Overview 10
2. TECHNICAL DATA 10
2.1 Meter LED & Power
Registration Security 10
2.2 Main Contactor 10
2.3 Power Supply 10
2.4 Metrology 10
2.5 Environmental 10
2.6 Dimensions 11
3. NORMAL FUNCTIONAL OPERATION 11
3.1 Normal Operation Display 11
3.2 Additional Displayed
Information 11
3.3 Tournament Mode Override 12
3.4 Disconnection 12
3.4.1 No Remaining Credit 12
3.4.2 Reverse Energy Detection 12
3.5 Prepayment Card Tokens 12
3.5.1 Valid Cards 12
3.5.2 Card Errors 12
4. COMMAND CARD PROGRAMMING 13
4.1 Programming Method 13 & 14
4.2 Factory Defaults Reset 14
4.3 Date and Time 15
4.4 Timer Credit Token 15
4.5 Value hh:mm 15
4.6 Maximum Time hh:mm 15
4.7 Tournament Mode Override 15
4.8 Operational Mode Meter
or Timer 15
4.9 Area code 15
5. APPENDIX 15
5.1 Wiring Diagram and
Mounting Template 15
1