PROGRAM -
is
used
when programming frequencies into
channels.
ENTER - used
to
enter the frequency when programming
channels.
LIMIT,
A,
and
...
-are
used during frequency searching.
See
"Searching for Active Frequencies."
DIRECT - starts the direct search.
MODE-changes
the band mode
in
the following order:
AM-NFM-WFM.
STEP - used to change frequency steps
in
the following
order: 5 kHz-12.5 kHz-50
kHz.
RESET - initializes band mode and frequency step.
15
To Next Page
Loading...
