©2019, REC TEC Industries, LLC
Questions? CLICK for support!
Back to Table of Contents
16
Install Side Shelf
Using 4 hex bolts, at washers, and locking
washers (#4), attach the side shelf with
controller (#19) left side of the grill body (#1).
Bull Horn Handle Assembly
Attach bull horn handles (#21) with bull horn
mounting pads (#26) to grill lid using the small
bolts that are screwed into the bull horn handle.
Place mounting pad between grill lid and handle.
Once the shelf is securely
attached, connect the 5 pin
and RTD wire connectors.
Proper placement will result in the handle
facing inward with the tip slightly upward.
To Next Page
Loading...