©2019, REC TEC Industries, LLC
Questions? CLICK for support!
Your carton contains the following:
- 1 preassembled grill body with attached skirt #1
- 2 preinstalled interior lights #2
- 2 drip buckets #3
- 1 hardware set #4
- 2 large grill racks #5
- 1 front cart panel with logo #6
- 1 back cart panel with access panel #7
- 2 platinum tipped meat probes #8
- 2 bottom cart shelves #9
- 1 right side cart panel #10
- 1 left side cart panel with notch #11
- 1 internal cart frame #12
- 4 bottom grill grates #13
- 1 front folding shelf #14
- 1 meat hanging rod #15
- 2 drip pans #16
- 4 locking caster wheels #17
- 2 smoke stack assemblies #18
- 1 side shelf with controller #19
- 1 ame deector with integrated smoke tray #20
- 2 iconic micro polished bull horn handles with hardware #21
- 1 back cart access panel #22
- 2 pull bar handles with hardware #23
- 4 pull bar handle brackets #24
- 2 bull horn mounting pads #25
Back to Table of Contents
6
Please note that during shipping some movement
may have taken place, so a complete visual
inspection is required. Be sure to inspect entire
grill after removing the protective shipping carton.
Some surfaces may be sharp, so wear gloves
when assembling.
Do not plug in the grill until it is fully assembled
and you’re ready to cook.
R
T-250
0
To Next Page
Loading...