EasyManua.ls Logo

Rec Tec Grills RT-2500 - Manual Start Up

Default Icon
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
©2019, REC TEC Industries, LLC
Questions? CLICK for support!
In case of ignitor failure, you can start your
REC TEC BFG manually:
1. Remove the stainless steel grates, drip pan and ame
deector.
2. Clean out re pot and place no more than 1/2 cup of pellets
in the bottom. Add a small amount of solid fuel re starter,
such as those made from sawdust and wax or use wood
shavings.
If you have a torch lighter, a re starter is not needed.
3. Light the re starter.
4. After the pellets are burning briskly, turn on your grill. If your
re goes out, repeat steps 1-4.
5. If your re stays lit, replace the stainless ame deector, drip
pan and cooking grates and close the lid.
Be careful not to touch the re.
Back to Table of Contents
34
CAUTION: DO NOT USE FLAMMABLE
LIQUIDS SUCH AS GASOLINE,
GASOLINE-TYPE LANTERN FUEL,
KEROSENE, CHARCOAL LIGHTER FLUID,
OR SIMILAR LIQUIDS TO START OR FRESHEN-UP THE
FIRE! KEEP ALL SUCH LIQUIDS WELL AWAY FROM
THE GRILL WHILE IT IS IN USE.
Tip: A paper towel, shredded cardboard, or
shredded newspaper can work as a substitute.