LED LED ON SOLID LED ON FLASHING
Power On
Temperature
Mode Enabled
Heat Pump on Call
Heat Pump in
boost Mode
Heat Pump Fault
Temperature
Sensor Fault
HEAT PUMP CONTROL V1.1
EXIT
BOOST
ENTER
PWR
TEMP
HP ON
BOOST
FAULT
ERROR
MENUTEMP
59 °C
Reclaim Energy | Owners/Installation Manual – Controller v1.1
16
5
Eg during Options 2 – 6; When the heating is disabled
due to the time period, the Green LED will be solid,
when temperature mode is enabled due to the time,
the Green LED will fl ash.
STATUS OF OPERATION LED AND
BUTTON FUNCTION SUMMARY
CONTROLLER STATUS LEDS
Temperature control mode is disabled if a faulty temperature
sensor is detected (Eg-8 and Eg-9), although the boost mode
is still operational.
IMPORTANT
8
To Next Page
Loading...