Record Power CL3-CAM User Manual

1
Original Instruction Manual
CL3-CAM Professional 5 Speed Lathe
CL4-CAM Professional Electronic Variable Speed Lathe
Including optional CL3/B Bowl Turning Attachment for CL Series Lathes
& RPLB24-48 Adjustable Lathe Stand for CL Series Lathes
Important
For your safety read instructions carefully before
assembling or using this product.
Save this manual for future reference.
Always wear safety glasses when
using woodworking equipment.
Always read the instructions
provided before using
woodworking equipment.
i
Kg
Version 2.0
October 2012
To register this product please visit
www.recordpower.info
It is important to register your product as soon as possible in order to receive efficient after sales
support and be entitled to the full 5 year guarantee. Your statutory rights are not affected.
Please see back cover for contact details.

Record Power CL3-CAM Specifications

General

Type	Wood Lathe
Voltage	230V
Spindle Thread	1" x 8 TPI
Taper	MT2
Swing Over Bed	305 mm
Distance Between Centers	36 inches
Motor Power	0.5 HP

Summary

Explanation of Symbols

General Health & Safety Guidance

Safe Operation, PPE, and Workspace Setup

Covers PPE, dress, workspace safety, and environmental considerations.

Machine Operation, Electrical Safety, and Precautions

Details safe machine use, electrical safety rules, extension cable usage, and general precautions.

Machine Handling, Motor Safety, and Woodturning Safety

Covers machine movement, motor heat, and basic woodturning safety.

Additional Health & Safety for Woodturning Lathes

Woodturning Techniques and Safety Guidance

Covers specific woodturning methods and safety.

CL3-CAM & CL4-CAM Specifications

Assembly Instructions

Identifying All Assembly Contents

Lists all parts included in the packaging for assembly.

Bench Selection and Initial Lathe Assembly Steps

Guides on bench selection and fitting end brackets.

Connecting Angle Straps and Bed Bars

Explains how to attach key structural elements.

Attaching the Tailstock Assembly

Step-by-step guide for mounting the tailstock.

Banjo and Toolrest Assembly Steps

Instructions for assembling the banjo and toolrest holder.

CL3-CAM Headstock Assembly Procedure

Details the process for assembling the CL3-CAM headstock.

Completing CL3-CAM Headstock Assembly

CL4-CAM Headstock Assembly Procedure

CL4-CAM Motor Assembly and VSLK Unit

Pulley Alignment and Lathe Levelling

Lubricating the Bronze Bearing Before Use

Intended Use of the Lathe & Basic Woodturning Instructions

Lathe Purpose, Safety, and Timber Mounting

Woodturning Techniques and Lathe Speeds

Control Identification & Function

Lathe Operation

Restarting Machine and Speed Control

Covers restart procedures and speed setting.

Lathe Component Adjustments

CL4-CAM Variable Speed Unit Controls

Focuses on the specific controls for the CL4-CAM model.

CL3-CAM Switch Box and Belt Changes

Covers CL3-CAM controls and changing the belt speed.

Adjusting the Bronze Taper Bearing

Maintenance

Troubleshooting

Common Lathe Problems and Solutions

Lists issues like motor not starting, stalling, noise, and vibration with remedies.

Electrical Connection & Wiring Diagram

Assembly of the CL3/B

Fitting the CL3/B Bracket and Setup

Positioning and Adjusting the CL3/B Bowl Rest

Use & Application of the CL3/B

RPLB24-48 Assembly

Step-by-Step Assembly of RPLB24-48 Bench

Fitting Lathe to the RPLB24-48 Bench