To Next PageTo Next Page
Need help?Do you have a question about the Record Power DML305 and is the answer not in the manual?
General| Swing Over Bed | 305 mm |
|---|---|
| Speed Range | 500 - 2000 RPM |
| Spindle Thread | M33 x 3.5 |
| Tailstock Taper | MT2 |
| Motor Power | 0.37 kW |
| Spindle Taper | MT2 |
Explains symbols requiring specific actions before or during use.
Important electrical safety requirements and connections.
Precautions to avoid electric shock hazards.
Warning against exceeding machine limits.
Importance of securely holding workpieces during operation.
Importance and correct usage of dust extraction systems.
Advice on maintaining machine guards for safety.
Recommends using qualified personnel for repairs.
Safety precautions specific to woodturning lathes.
Safety procedures and tips during lathe operation.
Steps for attaching the tool rest holder to the lathe bed.
Guidance on securely mounting the lathe to a stable surface.
Instructions for adjusting the tool rest position and height.
Guidance on moving and adjusting the tailstock spindle.
Steps for changing the spindle speed settings.
Procedures for starting, stopping, and emergency stops.
Steps to take if the machine stalls or encounters a blockage.
Specifies the designed purpose and limitations of the lathe.
How to mount timber using a faceplate or chuck.
Steps for securely mounting timber between centres.
Importance and method for correct tool rest positioning.
Explains how to select appropriate spindle speeds for safety and performance.
Explains why dust extraction is crucial for health and machine maintenance.
Solutions for the motor failing to start.
Diagnosing and resolving issues with motor power loss.
Wiring color codes and connections for 230V single phase.
