Record Power PT260 - Foreword; Use of the machine; Purpose of the machine; Workers qualifications

Foreword
These instructions have been created by the device manufacturer and are an integral part of the
machine delivery. They contain basic information for qualified operating staff and describe the
environment and manners of the machine use for which it has been designed, and also contain any
information necessary for the correct and safe operation.
The machine is equipped with various safety devices protecting both the operator and the machine
for its common technological use. Nevertheless these measures cannot cover all safety aspects
and therefore it is necessary that the operator should read and understand these instructions
before starting to use the machine. Errors made in the course of installation as well as during
operation itself will thus be avoided.
Do not try therefore to put the machine into operation before you have read all
instructions for use supplied together with the machine and before you have
understood all its functions and working procedures.
Certain information or drawings may not be intended directly for the machine purchased by you as
these instructions contain any information for various variants of this type made by our company.
By comparing the respective part of the instructions with a particular machine you will find out
whether or not they correspond to each other.
The manufacturer reserves the right to make partial alterations within continuous
technical machine development.
Use of the machine
Purpose of the machine
The machine is designed as a combined planer and thicknesser machine for use in joiners
shops(plants) at lengthwise (related to wood fibres) processing of wood and materials on its base
within workpiece width of 310 mm.
The machine is designed for operation performed by one worker only.
The machine may not be handled by children and youngsters in any manner.
Workers’ qualifications
Only an expert skilled in the field of wood-machining or a worker instructed and trained by such
expert may operate the machine, regardless of the sex. While working on the machine the operator
must get familiar with these instructions and comply with any safety rules, regulations and
provisions in force in the respective country.