Record Power PT260 - Transport and storage; Technical specifications

intensity 500 lux.
- Never put any tools or any other objects on working tables or covers.
- Always keep the working area clean and tidy.
Transport and storage
Transport and storage
While transporting or handling the machine, be most careful and let this activity be done by
qualified personnel especially trained for this kind of activity.
While the machine is being loaded or unloaded, make sure that no person or subject gets pressed
by the machine !
Do not enter the area under the machine lifted by a crane or a high-lift trolley!
During transporting or storing the machine, means must be taken to protect the machine against
excessive vibrations and humidity.
It should be stored in a shelter at temperatures ranging from -25°C to 55°C.
As standard, the machine is wrapped up in a plastic tray and is transported this way. Upon request
the machine may also be packed in a robust wooden box.
Technical specifications
Machine Length
mm
1125
Machine width
mm
700
Machine height
mm
955
Table height
mm
830
Table of planing machine
mm
1125X260
Table of thicknessing machine
mm
545X258
Machine weight
kg
225
Rated voltage
V
230
Rated frequency
Hz
50
Cutter block Ø
mm
70
Cutter block knives number
pcs.
3
No load cutter block rotation speed
min
-1
5500
Feeding rollers Ø
mm
32
Max. planing width
mm
260
Max. depth of planing
mm
3
Angle of workpiece fence
0
0
-45
0
Max. thicknessing width
mm
258
Max. depth of thicknessing
mm
4.5
Max. workpiece height of thicknessing
mm
225