Record Power PT260 - Working environment; Storage and transportation temperature; The environment classification; Safety instructions

Working environment
The machine must be operated in a workshop environment the temperature of which does not
exceed +40℃and does not drop below +5℃. The relative humidity of ambient is from 30% to 95%,
non-condensing. The height above the sea level is up to 1000 m.
Storage and transportation temperature: -25~55℃
The environment classification
– danger of inflammable dust fire.
Safety instructions
General
This machine is equipped with various safety devices protecting both the operator and the
machine. Nevertheless, this cannot cover all safety aspects and therefore the operator, before
putting the machine into operation, must read this chapter and understand it fully. Furthermore the
operator must also take into account other aspects of danger relating to the surrounding
conditions and material.
Basic safety requirements
- Before connecting the machine to the mains make sure that all safety items are in their active
positions and check their functioning. If it is necessary to remove the doors or protective
covers, turn off the switch and disconnect the plug from its socket.
- Kick-back catchers must be freely movable and their functioning must be checked regularly,
maybe several times a day.
- Do not connect the machine to the mains while the door or protective cover is removed.
- In order to avoid improper operation get acquainted with the location of switches before
switching the machine on.
- Remember the position (location) of the emergency stop switch so that you can use it
promptly at any time.
- Be careful and do not touch any switches while the machine is being operated.
- Do not touch any rotating tool by hands or with any other object under any circumstances.
- In the case that you are not going to work on the machine, turn off the machine by the switch
and disconnect the plug from the supply socket.
- Before cleaning the machine, switch off the machine and disconnect the plug of the machine.
- Before doing any maintenance work inside the machine, switch off the machine and disconnect
the plug of the machine.
- Do not alter the machine in any manner which might cause any risk to its safe operation.