Need help?Do you have a question about the Redarc BCDC1225 and is the answer not in the manual?
General| Input Voltage Range | 9 - 32VDC |
|---|---|
| Output Voltage | 12VDC |
| Output Current | 25A |
| Operating Temperature | -20°C to +60°C |
| Warranty | 2 years |
| Efficiency | Up to 95% |
| Battery Type Compatibility | AGM, Gel, Lithium |
| Protection Features | Over temperature, Short circuit |
General safety guidelines and warnings for using the BCDC1225 appliance.
Details how the BCDC1225 connects and operates with an alternator input.
Explains the BCDC1225's capability to charge from solar panels via MPPT.
Specifies voltage thresholds for turning the BCDC1225 ON/OFF in various modes.
Describes the Boost, Absorption, and Float stages of the BCDC1225 charging process.
Explains the function and meaning of the external indicator LED for charging status.
Details the front panel display, battery type settings, and charging status LEDs.
Lists and explains various error codes indicated by LED flashing sequences.
Covers unit mounting and initial wiring connection steps.
Details cable sizing and connection points for installation based on length.
Provides detailed instructions and recommendations for wiring connections using butt splices.
Explanation of BCDC turn-on/off voltages and 9V operation.
How the BCDC boosts voltage to charge auxiliary batteries from low input.
Recommendations for optimal mounting location for the BCDC unit.
How the BCDC manages high temperatures and output current.
Clarification on whether a battery isolator is needed with the BCDC.
Information on charging different battery chemistries with the BCDC.
Troubleshooting tip for BCDC stuck in 24V mode, not starting.
To Next Page