Reebok RL900 - Page 8

11.identifytheLeftHandlebar(7).AttachtheLeft
HandlebartotheleftPivotArm(20)withfourM8x
13mmButtonScrews(90)asshown.
AttachtheRightHandlebar(6)to therightPivotArm
(20)inthesameway.
12.PositiontheFrontLeftPivotCover(21)andtheRear
LeftPivotCover(31)overtheleftPivotArm(20)as
shown.AttachtheLeftPivotCoverswithanM4x
16mmRoundHeadScrew(91)andtwoM4x 16mm
Screws(89).
AttachtheFrontRightPivotCover(29)andtheRear
RightPivotCover(notshown)overtherightPivotArm
(notshown)inthesameway.
13.WhileanotherpersonholdstheConsole(17)nearthe
Upright(4),attachtheUpperWireHarness(58)and
thePulseSensorWire(25)tothecorrespondingcon=
solewireharnesses.Then,attachtheConsoletothe
UprightwithfourM4x 16mmScrews(89),being
carefulnotto pinchthewires.
AttachtheUprightCover(22)to theUpright(4)with
twoM4x 16mmRoundHeadScrews(91).
14.PlugthePowerCord(56)intothePowerReceptacle
(70)attherearoftheellipticalexerciser.
11
9O
12
91
\
31
/ /
89
\
89
13
22
25
17
14 ',
I
/
I \
/ /
56
15.MaRe sure that all parts of the eHipticam exerciser are properly tightened. Cover the floor beneath the
elliptical exerciser to protect the floor from damage. Note: Some extra hardware may be left over.