Press the Power button again and add or
delete channels.
After aHvalid channeUs avaHabb in your area have
been saved into the tebvbion's memory (see step
5 on page 21), you can manually add channeUs or
debte unwanted channeUs,
To add or debte a channel first press the
ChanneU buttons until the desired channeU number
appears on the screen, Then, press the VoUume
increase button to add the channel or the VoUume
decrease button to debte the channel Continue
this process until you have added aHdesired
channeUsand debted aH unwanted channeb,
Press the Power button again and setect an
antenna connection or a cable connection.
After the Power button is pressed, press the
VoUumedecrease button to sebct the Air setting,
the VoUume increase button to select the Standard
Cable setting, the Channel decrease button to se-
bct the Cable IRC setting, or the Channel in-
crease button to select the Cable HRC setting,
Note: The setting that you select will not appear
on the screen, If you have connected an antenna
to the treadmill, the Air setting should be selected,
If you have connected a CATV cable, one of the
three Cable settings should be selected; try all
three Cable settings, if necessary, to find the opti-
mal setting,
Press the Power button again and save
channels into the television's memory.
When the Power button is pressed, the television
will begin scanning all of the channels available in
your area, When no broadcast signal is detected
on a channel, the channel will be skipped, When a
broadcast signal is detected, the channel will be
saved into memory and the next channel will be
selected, This process will continue until the high°
est channel is reached, Do not remove the key
while the television is scanning channels.
When you are finished using the information
mode, remove the key.
To exit the information mode at any time (except
while the television is scanning channels), remove
the key from the console,
The treadmill features
a cushioning system
that reduces the im-
pact as you walk or
run on the treadmill
To increase the firm°
ness of the walking
platform, turn the ad-
justment knob eoun- Knob
tercloekwise, To de°
crease the firmness,
turn the knob clockwise, Note: The faster you run on
the treadmill, or the more you weigh, the firmer the
walking ptatform should be.
21
To Next Page
Loading...
