Beforethepersonaltelevisioncanbeused,youmustconnectanantenna,a 75ohmCATVcable,or aVCR
tothe75ohmantennaterminalonthetreadmillframe.Note:Noantenna,cable,or adapteris included.
HOWTOCONNECTANANTENNA 300OhmFiatWire
Indoor Antenna
1. Place a VHF
antenna in the
desired loca-
tion. Connect
the 300 ohm
fiat wire from
the antenna to
a 300 ohm to
75 ohm
adapter.
Screwdriver
VHF 300
Ohm Fiat
Wire
300 to 75 Ohm Adapter
2. Push the 300
ohm to 75 ohm
adapter onto
the 75 ohm an-
tenna terminal
on the treadmill
frame near the
power cord.
VHF
Antenna
300 to 75 Ohm
Adapter.
75 Ohm
Terminal
Outdoor Antenna
Note: Outdoor antennas are subject to weathering that
can reduce signal quality, inspect your antenna and
the bad-in wiring before connecting the antenna.
1. See the drawing near the bottom of this page.
Connect the 300 ohm fiat wire from the antenna to a
300 ohm to 75 ohm adapter.
2. Push the 300 ohm to 75 ohm adaptor onto the 75
ohm antenna terminal on the treadmill frame near
the power cord.
75 Ohm CATV Cabb
1,
See the drawing near the bottom of this page.
Connect the 75 ohm CATV cabb from the antenna
to the 75 ohm antenna terminal on the treadmill
frame near the power cord.
HOW TO CONNECT A 75 OHM CATV CABLE
1. Connect a 75 ohm
CATV cable to the 75
ohm antenna terminal
on the treadmill frame
near the power cord.
75 Ohm CATV Cable
75 Ohm Terminal
HOW TO CONNECT A VCR
1, Connect one end of a 75 ohm CATV cable to the
video output jack on your VCR,
2, Plug in the power cord of your VCR, See your VCR
user's manual for proper grounding instructions,
Combination
300 Ohm
Fiat Wire
3. Connect the 75 ohm CATV cable to the 75 ohm an-
tenna terminal on the treadmill frame near the power
cord.
Note: To operate the television with your VCR, make
sure that channel 3 or 4 is selected.
300 to 75
Ohm Adapter
75 Ohm
CATV CaNe
75 Ohm CATV Cable
To Next Page
Loading...
