Reflex Marine FROG-XT4 - 4.8 Data Plates; Inspection Data Plate Details; Marker Plate Details

Rev 3.1 23 | P a g e
4.8 Data Plates
Inspection Data Plate
An inspection data plate will be issued and attached by the test house, which should show:
i. Tare Weight (kg)
ii. Pay load / SWL (kg)
iii. Maximum gross load (kg)
iv. The load test date (DD/MMM/YYYY)
v. Test load (kg)
vi. Serial number: XT4-XXX (where XXX is unit I.D. No)
vii. Model number: XT4
viii. Entry into service date (DD/MMM/YYYY)
Marker Plate
i. Model number: XT4
ii. Serial number: XT4-XXX (where XXX is unit I.D. No)
iii. Date of manufacture (DD/MM/YYYY)
iv. Tare weight (kg)
v. Pay load / SWL (kg)
vi. Maximum gross load (kg)
vii. Maximum number of passengers (standard & stretcher mode)
Figure 5 FROG-XT4 Marker Plate