Reflex Marine FROG-XT6 - Safety Harness Procedure

Rev 0.2 11 | P a g e
3.5 Safety Harness Procedure
To make passenger entry more efficient, where possible, deck crew or passengers should loosen harness prior to entering the carrier. All
passengers should be familiar with seating procedure and practice entry prior to operations.
Step 1
Enter the carrier
from the
appropriate side
of your chosen
seating position
Step 2
Pull the harness
straps over your
shoulders and
pull the buckle
together
Step 3
Take the lap
fastener clip and
feed through eye.
Step 4
Fold over the
clip and the
safety belt is
secure
Step 5
Next pull the
LOWER straps
first
Step 6
Then the UPPER
straps to make a
tight fit
Reverse the
operation for
quick release
Step 7
Fold back
buckle
Step 8
Pull apart
harness straps
Step 9
Exit the carrier on
appropriate side