6
Cartridge selection
The Ios phono pre amplifier is not suitable for use with any
Moving Magnet (MM) cartridges, it can only be used with
moving coil (MC) cartridges.
The Ios has been designed to work with most manufacturers
moving coil (MC) cartridges.
There are five different input load settings, select the required
load to match to that specified by the cartridge manufacturer.
The Ios has five different DC resistance settings 1-5.
Note: It is permissible to try different loading conditions and
resistance settings as sometimes changing the load gives a
different sonic performance more suited to your personal taste.
These variables are explained in greater detail in the controls
section of this manual.
Your Rega dealer will be able to give guidance to help match
your specific cartridge to the correct gain settings.
To Next Page
Loading...
Need help?
General
