This can alternatively be accomplished by pressing and holding the
play button while listening to the radio station.
REMOVE PRESETS
To remove a radio station from your preset list, press the menu button
and use the rotary encoder to select the “Presets” option. Now use
the rotary encoder to select the “Remove Presets” option, and select
the stations to remove again using the encoder.
Press the menu button once to return to the presets menu, again for
the main menu, and a third time to return to the original display.
VOLUME
Utilize the rotary encoder to increase or decrease the volume coming
out of the speakers. Volume is displayed on a scale from 0-24 for all
active zones.
TONE
Select the menu button in the upper left hand corner and turn the
rotary encoder to scroll through the menu options and select “Setup”
by pressing the encoder in. In this sub menu, use the rotary encoder
to select “Tone”.
Now use the rotary encoder to modify the bass setting from -7 to +7.
Press the rotary encoder to select the setting. Now the treble scale is
selected. Again use the rotary encoder to modify the treble setting
from -7 to +7. Press the rotary encoder to select the treble setting.
Press the menu button to level up one menu to the tone menu. Press
the menu button again to reach the setup menu, again to return to the
base menu, and once more to return to the regular display.
6-28
Equipment Operation
To Next Page
Loading...
