Cosmetic Care & Maintenance
7-19
Remote Control
Check the helm control box and the cable attachment
at the engine for tightness and shifting without
binding. This applies to engines with standard remote
controls only.
Shift and throttle controls at both the engine and
helm areas must be checked on a periodic basis. At
the engine end, make sure all control cable hardware
is tight and control cable brackets are secure. An
application of silicone spray on the cable ends
periodically will keep control cables working freely
and fi ghts corrosion. At the helm end check to make sure the control
box hardware is tightly secured. Contact a marine professional or Regal
dealer for further assistance.
To Next Page
Loading...
