BALANCE
Select the menu button in the upper left hand corner and turn the
rotary encoder to scroll through the menu options and select “Setup”
by pressing the encoder in. In this sub-menu, use the rotary encoder
to select “Balance”.
Now use the rotary encoder to modify the sound coming out of the
left and right speakers on a scale from -7 (left) to +7 (right). Press the
rotary encoder to select the setting.
Press the menu button to level up one menu to the balance menu.
Press the menu button again to return to the setup menu, again fro
the main menu, and once more to return to the regular display.
MUTE
To mute the sound coming out of the speakers with the press of
a button, select the mute button located as the lower left function
button on the stereo face. Press this button once more to un-mute.
PLAY / PAUSE
The button directly in the middle of all function buttons controls the
ability to play or pause a song on an iPod or auxiliary capable device.
This button toggles between the play function and pause function.
SELECT VOLUME LIMIT ON ZONES
Select the menu button in the upper left hand corner and turn the
rotary encoder to scroll through the menu options and select “Zones”
by pressing the encoder in. In this sub-menu, select which zones you
wish to modify the volume limit by using the rotary encoder.
6-29
Chapter 6
To Next Page
Loading...
