CHAPTER 6
6-26
The PowerTower can
be hinged forward for
clearance purposes or
for highway towing.
There is a single
pole switch labeled
“arch” at the helm
area that connects to
a lift motor and a
set of hydraulic rams
that raise or lower the
wakesport tower.
Before energizing the switch pay special attention that all passengers maintain a
safe distance from the tower hinge mechanisms located at the base of the wakesport
tower on the deck. As the operator energizes the arch switch to hinge the
tower forward visually monitor the port and starboard deck to ensure
all passengers are clear of the hinge mechanism. This same procedure
applies for lowering the mechanism to the original position.
Regal recommends hinging the tower completely forward before towing
the vessel.
WHEN OPERATING POWERTOWER
KEEP ALL BODY PARTS CLEAR
OF TOWER HINGE MECHANISMS.
Hinging Mechanism
To Next Page
Loading...
