Regal 2200 - Page 143

CHAPTER 6
6-10
Power
To energize the stereo, first turn on the stereo breaker located on the
main DC panel. This is turn supplies 12 volts to the stereo unit.
Next, press the SRC button.
To deactivate the unit, press the SRC button and hold it down for 1
second.
Selecting the Source
Press the SCR button. The display will show Tune for AM-FM, CD,
and Disc for external disc (CD changer if equipped).
Volume
Press the up button to increase the volume.
Press the down button to decrease the volume.
To rapidly turn down the volume, press the ATT button.
Each time the button is pressed the Attenuator turn on and off.
When its on, the ATT indicator blinks.
Loudness
This compensates for low and high tones during low volume.
Press the loud button for at least 1 second.
Each time the button is pressed for at least 1 second the loudness
turns on and off.
When it’s on, loud indicator is on.
CHAPTER 6
6-10
Power
To energize the stereo, first turn on the stereo breaker located on the
main DC panel. This is turn supplies 12 volts to the stereo unit.
Next, press the SRC button.
To deactivate the unit, press the SRC button and hold it down for 1
second.
Selecting the Source
Press the SCR button. The display will show Tune for AM-FM, CD,
and Disc for external disc (CD changer if equipped).
Volume
Press the up button to increase the volume.
Press the down button to decrease the volume.
To rapidly turn down the volume, press the ATT button.
Each time the button is pressed the Attenuator turn on and off.
When its on, the ATT indicator blinks.
Loudness
This compensates for low and high tones during low volume.
Press the loud button for at least 1 second.
Each time the button is pressed for at least 1 second the loudness
turns on and off.
When it’s on, loud indicator is on.