V 11/2014
Temperature Control Unit 90smart/150smart Operating Instructions 5
Operating Instructions
General
Introduction
These Operating Instructions contain a detailed description of the Tem-
perature Control Unit 90smart/150smart as well as important information
for safe operation and optimal maintenance.
The Operating Instructions must be kept near the temperature control
unit and must always be accessible to operating and maintenance per-
sonnel.
Operating Range
The operating range and heat transfer fluid of the Temperature Control
Unit 90smart/150smart are shown in the following table (in this regard,
see also the chapter "Technical Data" in the Maintenance section).
Temperature Control
Unit Type
90smart 150smart
Temperature range
up to 90 °C up to 150 °C
Heat carrier/medium
Water Oil
NOTE
The technical data and information for installation, start-up and maintenance of
the temperature control unit can be found in the maintenance section of these
operating instructions. The Operating Instructions should be kept near the de-
vice/system and always be accessible to operating and maintenance personnel.
To Next Page
Loading...