Need help?Do you have a question about the REGLOPLAS 90smart and is the answer not in the manual?
Explains DANGER, WARNING, CAUTION, NOTE symbols.
Specifies the unit's purpose and operational limits.
Details operator duties, parameter changes, and residual risks.
Guidance on accessing and utilizing manual content.
Outlines the manual's content and importance.
Details temperature limits and heat transfer media.
Covers ambient conditions, ventilation, and positioning.
Mentions inspecting for damage and connections.
Verifies consumer integrity before connecting.
Specifies acceptable water parameters for the unit.
Best practices for hose and fitting installation.
Requirements for qualified electricians and voltage checks.
Introduction to the RT34 controller interface.
Step-by-step guide to start the unit.
Explains Pressure, Leak stop, and Suction modes.
Describes the meaning of various displays and LEDs.
Procedure for adjusting operational setpoints.
Steps for modifying unit parameters.
Steps to safely turn off the unit.
Explains device-specific error indicators and causes.
Lists typical issues and their potential causes.
Describes error related to the Pt100 sensor.
Introduces the RT70 controller and its display.
Explains the operation of control panel buttons.
Describes the meaning of status LEDs.
Describes key operational modes like draining.
Interpretation of graphical symbols on the interface.
How to read operational status on the RT70.
Procedure for adjusting SP1/SP2 values.
How to enter and navigate the parameter settings.
Steps to initiate operation of the RT70 system.
Checks for correct motor phase sequence.
Steps for safely turning off the RT70 system.
Details on activating and using the leak-stop function.
Conditions and usage of leak-stop function.
How to enable/configure leak-stop function.
Draining the unit via suction or air.
Security features for accessing the system.
Procedures for resetting and viewing alarms.
Saving, resetting, and loading settings.
Procedures for unit replacement or removal.
Display and handling of system alarms.
Common warnings and how to resolve them.
Specific alarms and their corrective actions.
Solutions for various error messages.
System-level errors and their resolutions.
Crucial safety precautions before maintenance.
Recommended inspection and maintenance intervals.
Routine checks performed daily.
Routine checks performed monthly.
Routine checks performed semi-annually.
Routine checks performed annually.
Safety and steps for cleaning the unit.
Safety guidelines before performing repairs.
Procedures and precautions for shipping.
How to safely discard the unit.
Visual guide to proper hose routing and fitting.
Detailed technical specifications for both models.
Schematic representation of the 90smart unit.
Schematic representation of the 150smart unit.
Illustrates pump performance curves.
Cooling performance for the 90smart model.
Cooling performance for the 150smart model.
Identification of parts for the 90smart model.
Identification of parts for the 150smart model.
Drawings showing physical dimensions of the 90smart unit.
Drawings showing physical dimensions of the 150smart unit.
General| Brand | REGLOPLAS |
|---|---|
| Model | 90smart |
| Category | Control Unit |
| Language | English |
To Next Page
