4. Accessories 35
4.1 WIG PLUS 1 foot operated remote control 35
4.1.1 Switch position; Foot-operated control signal 35
4.1.2 Switch position; Hand-operated control signal 35
4.2 WIG PLUS 2 Hand remote control 35
4.3 REHM TIG-torch R-SR 7-17 und R-SR 7-26 DD with potentiometer and leather 36
4.4 TIGER SET 36
4.5 REHM water cooler RWK 1100 36
4.6 Adapter cable 36
4.7 Tiger-Mechanised welding 37
5. Commissioning 38
5.1 Safety Notes 38
5.2 Working with an increased electrical hazard 38
5.3 Setting up the welding unit 38
5.4 Connecting the welding unit 39
5.5 Ventilation of the welding power source 39
5.6 Guidelines for working with welding power sources 39
5.7 Connecting of the torch or electrode holder cables 39
5.9 Recommended welding lead cross sections 40
6. Operation 41
6.1 Safety instructions 41
6.2 Electrical hazard 41
6.3 Personal safety instructions 42
6.4 Fire prevention 42
6.5 Ventilation 42
6.6 Tests before switching on 42
6.7 Connecting the earth cable 43
6.8 Practical hints for use 43
7. Troubleshooting 46
7.1 Safety instructions 46
7.2 Fault finding table 47
8. Service and maintenance 50
8.1 Safety instructions 50
8.2 Preventative maintenance table 50
8.3 Cleaning the inside of the unit 51
8.4 Proper waste disposal 56
9. Circuit diagrammes 52
10. Spare parts list 56
10.1 Spare parts list with REHM article numbers 56
10.2 Machine components photographs 57
11. Technical Data 59
12. Index 60
To Next Page