39
Step 2: The beep will sound again. The last result will then appear.
Then the code number (F-2, F-3, or F-4) will appear for three seconds
followed by the Apply Blood symbol .
Verify that the code number
on the screen matches the code number printed on the bottle.
If the code number does not match, the meter may give a false
reading. If code does not match, use a new strip. If code still does
not match, use a new bottle of test strips or call Customer Service at
800.631.0076 (24 hours a day, 7 days a week). Verify that the date and
time appear on the screen and are correct. If date and time are not
correct, reset them (see Meter Set-up, page 13).
To Next Page
Loading...
