REMKO CLK Series User Manual

Operating and installation instructions
Edition GB - Q04 Read the instructions prior to performing any task!
CLK 30, CLK 50, CLK 70, CLK 120, CLK 150
REMKO CLK series
Automatic oil/gas heaters

REMKO CLK Series Specifications

General

Power supply	230 V / 50 Hz
Features	Overheat protection
Thermostat	Adjustable
Safety Features	Overheat protection
Color	Black

Summary

Safety Notes

Installation Without Exhaust Gas

Electrical Wiring and Safety Precautions

Instructions for safe electrical connection and wiring of the unit.

Safety Equipment and Control Systems

Safety Temperature Limiter (STB)

Functionality and reset procedure for the STB safety device.

Regulating and Monitoring Devices

Details on temperature controllers (TR) and monitors (TW), and their roles.

Automatic Burner Functionality

How the automatic burner functions and requires manual reset for certain faults.

Exhaust Gas Ducting

Pre-Commissioning Checks and Preparations

Initial Commissioning and Setup

Electrical Power Connection Procedure

Instructions for safely connecting the unit to the mains power supply.

Unit Shutdown and Ventilation Modes

Routine Care and Maintenance

Component Maintenance and Installation

Burner Flange and Assembly Installation Guide

Step-by-step guide for installing the burner flange and the burner unit.

Troubleshooting Guide

Unit Fails to Start Troubleshooting

Step-by-step troubleshooting for units that do not power on or initiate heating.

Burner and Power Supply Fault Diagnosis

Checks for burner issues, fuel delivery, and electrical supply problems.

Supply Air Fan Operation Issues

Electrical Wiring Diagram

Forced-Air Oil Burner Commissioning Procedures

Ignition Electrode and Baffle Plate Adjustment

Nozzle Selection and Air Inlet Adjustment

Burner Air and Pressure Tuning

Secondary Air and Nozzle Fitting Calibration

Pump Pressure Setting and Verification

Detailed process for setting and checking the oil pump pressure.

Technical Data Summary