Recirculation mode
In recirculation mode, the RBW 301 PV unit has
two fan stages available and the RBW 301 PV
-S
unit only has one (the middle) fan stage available.
The recirculation operation can be used in order to
ventilate the connected room, without the heat
pump (compressor) being in operation. To do so,
press the "Electric heating element" key (D) for
approx. 2 seconds. The fan symbol appears on the
display. It is possible to select 2 fan stages (only
for the RBW 301 PV unit). In order to implement a
setting, press the "Electric heating element" key
(D) for 2 sec.
REMKO RBW PV series
36