REMKO RBW PV Series User Manual

Parameter list (expert level) - continued
No. Description Code
Para-
meter
Value Range
62 Removes on/off switch status
S
S01 Status CL/OP
63 OHP switch (over heat protection) condenser S02 Status CL/OP
64 No function S03 Status CL/OP
65 Error output high pressure alarm switch status S04 Status CL/OP
66 Switch status elec. Heating coil S05 Status CL/OP
67 No function S06 Status CL/OP
68 Ambient temperature
t
t01
Measured
value
-9~99°C
69 Storage tank temperature, lower t02
Measured
value
-9~99°C
70 Storage tank temperature, upper t03
Measured
value
-9~99°C
71 Evaporator temperature t04
Measured
value
-9~99°C
72 Suction gas temperature t05
Measured
value
-9~99°C
73 Collector temperature t06
Measured
value
-9~99°C
74 Compressor status
O
O01 Status on/off
75 Electric heating coil status O02 Status on/off
76 Solenoid valve for defrosting O03 Status on/off
77 Fan speed low O04 Status on/off
78 Fan speed high/ circulation pump/ solar pump O05 Status on/off
79 Operation circulation pump/solar pump O06 Status on/off
80 EEV position O07 Status 0~500
1)
After reaching the lower usable limit
REMKO RBW PV series
50

REMKO RBW PV Series Specifications

General

Brand	REMKO
Model	RBW PV Series
Category	Heat Pump
Language	English