ENGINE AND PERIPHERALS
Overhauling the engine
10
10-106
NOTE:
Using device Mot. 1505
Switch on the device and bring the read head (A) up to
the belt wire for measuring.
Hold the read head between approximately 5 and
10 mm from the belt (distance X).
The measurement can be read on side (1) or (2) of the
belt as appropriate.
Either sensor, (a) or (b), may be used, provided that
the sensor being used as reference is outside the field
of measurement.
16164R
16165R
ProCarManuals.com
To Next Page
Loading...
