Renault F4R User Manual

© Renault s.a.s 2008
"The repair methods given by the manufacturer in this document are based on the technical
specifications current when it was prepared.
The methods may be modified as a result of changes introduced by the manufacturer in the
production of the various component units and accessories from which his vehicles are
constructed."
All copyrights reserved by Renault.
The reproduction or translation in part of whole of the present document, as well as the use
of the spare parts reference numbering system, are prohibited without the prior written
consent of Renault.
JUNE 2008 Edition Anglaise
X95, and F4R or F9Q or K4M or K9K
1
Engine and peripherals
10A
ENGINE AND CYLINDER BLOCK ASSEMBLY
11A
TOP AND FRONT OF ENGINE
12A
FUEL MIXTURE
12B
TURBOCHARGING
13A
FUEL SUPPLY
13B
DIESEL INJECTION
13C
PREHEATING
14A
ANTIPOLLUTION
16A
STARTING - CHARGING
17A
IGNITION
17B
PETROL INJECTION

Renault F4R Specifications

General

Fuel System	Multi-point fuel injection
Displacement	1998 cc
Bore x Stroke	82.7 mm x 93 mm
Compression Ratio	9.8:1
Fuel Type	Petrol
Valvetrain	DOHC, 16 valves
Applications	Renault Laguna, Renault Mégane, Renault Scénic
Engine Type	Inline 4 cylinder

Summary

Engine and peripherals

10A ENGINE AND CYLINDER BLOCK ASSEMBLY

Procedures for removing and refitting crankshaft seals, sump, and engine/gearbox assembly.

11A TOP AND FRONT OF ENGINE

Details on engine components at the top and front, including belts, pulleys, and timing.

12A FUEL MIXTURE

Information on fuel mixture components like inlet manifold, air filter, and throttle valve.

12B TURBOCHARGING

Precautions, removal, and refitting procedures for turbocharger and intercooler systems.

13A FUEL SUPPLY

Information on fuel supply system components including priming pump, filter, pressure, and flow checks.

13B DIESEL INJECTION

Precautions, component identification, and repair procedures for diesel injection systems.

13C PREHEATING

Procedures for removing and refitting pre/postheating units and heater plugs.

14A ANTIPOLLUTION

Information on antipollution systems including fuel vapour canister and EGR components.

16A STARTING - CHARGING

Procedures for removing and refitting the alternator and starter motor.

17A IGNITION

Steps for removing and refitting ignition coils and spark plugs.

17B PETROL INJECTION

Procedures for removing and refitting oxygen sensors, petrol injection computer, and sensors.

19A COOLING

Details on the cooling system, including specifications, checks, and component removal/refitting.

19B EXHAUST

Information on exhaust system parts, consumables, and precautions for repair.

19C TANK

Procedures for draining, removing, and refitting the fuel tank, filler neck, and fuel level sensor.

19D ENGINE MOUNTING

Steps for removing and refitting engine mountings and tie-bars.