13B-18
DIESEL INJECTION
Diesel injection computer: Removal - Refitting
F9Q or K9K
13B
a Remove:
-the diesel injection computer nuts (4) ,
-the diesel injection computer from the diesel injec-
tion computer mounting.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
-the diesel injection computer on the diesel injection
computer mounting,
-the diesel injection computer nuts on the diesel in-
jection computer mounting.
a Fit the diesel injection computer mounting with the
diesel injection computer.
a Refit the diesel injection computer mounting bolts.
a Connect the diesel injection computer connectors.
II - FINAL OPERATION
a Refit the diesel injection computer cover.
a Connect the battery (see Battery : Removal - Refit-
ting) (80A, Battery).
a Apply the after repair procedure using the diagnos-
tic tool :
-connect the diagnostic tool,
-select the « Diesel injection computer » ,
- go to repair mode,
- display the « After repair procedure » for the selec-
ted computer,
- carry out the operations described in the « After re-
pair procedure » section.
134213
To Next Page
Loading...
