Renault F9Q - User Manual

© Renault s.a.s 2008
"The repair methods given by the manufacturer in this document are based on the technical
specifications current when it was prepared.
The methods may be modified as a result of changes introduced by the manufacturer in the
production of the various component units and accessories from which his vehicles are
constructed."
All copyrights reserved by Renault.
The reproduction or translation in part of whole of the present document, as well as the use
of the spare parts reference numbering system, are prohibited without the prior written
consent of Renault.
JUNE 2008 Edition Anglaise
X95, and F4R or F9Q or K4M or K9K
1
Engine and peripherals
10A
ENGINE AND CYLINDER BLOCK ASSEMBLY
11A
TOP AND FRONT OF ENGINE
12A
FUEL MIXTURE
12B
TURBOCHARGING
13A
FUEL SUPPLY
13B
DIESEL INJECTION
13C
PREHEATING
14A
ANTIPOLLUTION
16A
STARTING - CHARGING
17A
IGNITION
17B
PETROL INJECTION

Summary

1 Engine and peripherals

10 A ENGINE AND CYLINDER BLOCK ASSEMBLY

Procedures for removing and refitting engine components like crankshaft seals, sump, oil filter, oil pump, and flywheel.

11 A TOP AND FRONT OF ENGINE

Covers engine components at the top and front, including belts, pulleys, timing belt, rocker cover, camshaft, and cylinder head.

12 A FUEL MIXTURE

Details on removing, refitting, and cleaning components related to fuel mixture.

12 B TURBOCHARGING

Covers turbocharging precautions, removal, refitting, and circuit diagrams.

13 A FUEL SUPPLY

Details on manual priming pump, fuel filter, fuel pressure, and fuel flow checks.

13 B DIESEL INJECTION

Covers precautions, component lists, and procedures for diesel injection system.

13 C PREHEATING

Covers removal and refitting of pre/postheating unit and heater plugs.

14 A ANTIPOLLUTION

Details on fuel vapour canister, EGR solenoid valve, intercooler, and exhaust gas recirculation system.

16 A STARTING - CHARGING

Covers alternator and starter removal and refitting procedures.

17 A IGNITION

Details on ignition coils and spark plugs removal and refitting.

17 B PETROL INJECTION

Covers oxygen sensors, petrol injection computer, pinking sensor, camshaft/crankshaft sensors.

19 A COOLING

Covers engine cooling circuit specifications, checks, and draining/refilling procedures.

19 B EXHAUST

Covers exhaust system parts, consumables, and precautions for repair.

19 C TANK

Details on fuel tank draining, removal, refitting, filler neck, and fuel level sensor module.

19 D ENGINE MOUNTING

Covers removal and refitting of engine mounting components.

Renault F9Q Specifications

General

Fuel Type	Diesel
Turbocharger	Yes
Engine Code	F9Q
Cylinder Arrangement	Inline
Valves	8
Fuel Injection	Direct injection
Aspiration	Turbocharged
Valvetrain	SOHC
Common Rail	Yes
Displacement	1870 cc
Bore x Stroke	80.0 mm x 93.0 mm
Torque Output	160-300 Nm