19C-1
TANK
Fuel tank: Draining
19C
DRAINING
I - DRAINING PREPARATION OPERATION
a Disconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
II - DRAINING OPERATION
a Unclip the manual fuel priming pump at (1) .
a Disconnect the fuel supply pipe union (2) from the
manual fuel priming pump.
Essential special tooling
Mot. 1311-08 Union for measuring fuel
pressure.
Essential equipment
pneumatic transfer pump for fuels
IMPORTANT
During this operation, be sure to:
- refrain from smoking or bringing red hot objects
close to the working area,
- be careful of fuel splashes when disconnecting the
union.
IMPORTANT
Wear leaktight gloves (Nitrile type) for this opera-
tion.
IMPORTANT
Wear goggles with side protectors for this opera-
tion.
WARNING
To prevent impurities from entering the circuit, place
protective plugs on all fuel circuit components
exposed to the open air.
WARNING
To avoid any corrosion or damage, protect the
areas on which fuel is likely to run.
F9Q or K9K
137737
137738
To Next Page
Loading...
