13A-7
FUEL SUPPLY
Fuel pressure: check
F4R or K4M
13A
CHECKING
I - PREPARATION OPERATION FOR CHECK
a Ensure you have a checking tool (Mot. 1311-01) and
a « T » union (Mot. 1311-08).
a Remove the front engine cover.
Essential special tooling
Mot. 1311-01 Fuel pressure test kit.
Mot. 1311-08 Union for measuring fuel
pressure.
IMPORTANT
During this operation, be sure to:
- refrain from smoking or bringing red hot objects
close to the working area,
- be careful of fuel splashes when disconnecting the
union.
IMPORTANT
Wear goggles with side protectors for this opera-
tion.
IMPORTANT
Wear leaktight gloves (Nitrile type) for this opera-
tion.
WARNING
To avoid any corrosion or damage, protect the
areas on which fuel is likely to run.
116887
To Next Page
Loading...
