Renault F4R - Exhaust Gas Recirculation Solenoid Valve: Removal - Refitting

14A-3
ANTIPOLLUTION
Exhaust gas recirculation solenoid valve: Removal - Refitting
K9K
14A
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Remove the front engine cover.
a Disconnect the oil vapour rebreathing pipe from the
rocker cover.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Disconnect the connector (1) from the exhaust gas
recirculation solenoid valve.
a Remove:
-the bolts (2) from the exhaust gas recirculation so-
lenoid valve,
- the exhaust gas recirculation solenoid valve,
- the exhaust gas recirculation solenoid valve seal.
Essential equipment
diagnostic tool
Tightening torquesm
exhaust gas recircula-
tion solenoid valve bolts
10 N.m
IMPORTANT
Wear protective gloves during the operation.
K9K, and 832
135478
135461