ENGINE AND PERIPHERALS
Overhauling the engine
10
10-64
Engines J8S 736 and 740
Injector holders - special features
The cylinder head has been modified to accept
BOSCH "KCA" threaded injector holders.
1 Flame-shield
2 Flame-shield washer
3 Seal
Fit a new seal and a new flame-shield washer
(oriented as shown in the diagram) every time the
injector holder is refitted.
Tighten the injector holders to 7 daNm using tool
Mot. 997-01.
92448-2R
ProCarManuals.com
To Next Page
Loading...
