ENGINE AND PERIPHERALS
Overhauling the engine
10
10-73
Remove the filter holder.
Replacing the bearing
NOTE: if the gearbox is fitted with a short shaft (A), it
does not need a bearing in the crankshaft.
If the gearbox is fitted with a long shaft (B) the
crankshaft must be fitted with a bearing.
Remove the bearing using tool Mot. 11.
Refitting the bearing
Cement the bearing with loctite FRENBLOC for
engines fitted with flywheel mounting bolts that have
no stop.
16547R
77443R
ProCarManuals.com
To Next Page
Loading...
