AUTOMATIC TRANSMISSION
Automatic transmission (Removal - Refitting)
23
REFITTING
Refitting does not present any difficulties,
proceed in the reverse order to removal.
CHECK THAT THE CENTRING PINS ARE PRESENT.
DO NOT REUSE THE CONVERTER MOUNTING
NUTS. ALWAYS FIT NEW NUTS.
Top up the oil (refer to the relevant section).
If the oil is changed, use the XR25 to apply
command G80** to reset the auto-adaptive
patterns to zero and command G74* to rest the oil
age counter in the automatic transmission
computer to zero.
23-13
To Next Page
Loading...
