Renault Espace - Sensors

AUTOMATIC TRANSMISSION
Sensors
23
Removal:
- of the speed sensors,
- of the line pressure sensor,
- of the exchanger flow control solenoid valve,
is carried out without draining and without
removal of the automatic transmission.
TIGHTENING TORQUES (in daN.m)
Input speed sensor mounting bolt 1
Output speed sensor mounting bolt 1
Exchange flow control solenoid valve bolt 1
Line pressure sensor bolt 0.8
13786-1R
Special feature of REMOVAL:
If a sensor is changed, always remove the modular
connector (refer to the section "Removal/refitting
of the automatic transmission").
IMPORTANT:
Protect the connector by slipping it into a
sealed plastic bag.
1 Input speed sensor
2 Output speed sensor
3 Exchanger flow control solenoid valve
4 Line pressure sensor
23-18