COOLING
Cooling assembly
19
Removal of the cooling system radiator requires
removal of the cooling assembly.
Place the vehicle on a two post lift.
Disconnect the battery.
Drain the refrigerant circuit using a charging sta-
tion.
Remove the front bumper (move aside the front
wheel arches to gain access to the bolts (C)).
Disconnect the fog lamps if necessary.
Drain the engine cooling circuit by disconnecting
the lower radiator hose.
Unclip the power steering oil cooler and attach it
to the engine.
97096R
11208M
11009M
10994M1
19-1
To Next Page
Loading...
