COOLING
Cooling assembly
19
Remove the mounting bolts securing the baffles
on the side members.
11007M1
Fold back the baffles towards the cooling assem-
bly.
Remove the mounting bolt securing the air condi-
tioning circuit pipes clamp on the dehydration ca-
nister outlet (1) and condenser inlet (2). Close the
holes immediately.
Disconnect:
- the trifunction pressure switch (3) above the
bottle,
- the upper radiator hose,
- the radiator thermal switch,
- the fan (4),
- the relay housing (5).
Detach the electrical harness from its mountings
on the cooling assembly and fold it back on the
left-hand side.
DIM1922
19-2
To Next Page
Loading...
