3.9
AUTOMATIC CLIMATE CONTROL
(3/3)
Manual use
Press button 5 – the integrated indica-
tor light comes on.
Prolonged use of this position may lead
to odours, caused by non-renewal of
air, and the formation of condensation
on the windows.
We therefore advise you to return to au-
tomatic mode as soon as air recircula-
tion is no longer needed, by pressing
button 5.
To exit this function, press button 5 or
button 7 again.
Stopping the system
Turn control 1 to “OFF” to stop the
system. To start, turn control 1 again
to adjust the blower speed or press
button 7.
The demisting/de-icing will still take
priority over the air recirculation.
NB:
– during recirculation, air is taken from
the passenger compartment and
is recycled, with no air being taken
from outside the vehicle;
– air recirculation allows the external
atmosphere to be cut off (when driv-
ing in polluted areas, etc.);
– bringing the passenger compartment
to the desired temperature as quickly
as possible.
Air recirculation (isolation of
the passenger compartment)
This function is managed automatically
(operation is confirmed by a warning
light on button 5), but you can also acti-
vate it manually.
To Next Page
Loading...
