1.57
Wait a few seconds, the minutes will
flash: repeatedly press or press and
hold button 1 or 2 to set the time.
When setting is complete, the hours
and minutes remain displayed continu-
ously for 2 seconds: your setting is reg-
istered.
You may change the display.
Display A or B
To access the display 3 for setting the
time, press button 1 (or) 2 and Wait
a few seconds; the hours and min-
utes will begin to flash. You are now in
setting mode, press and hold button 1
or 2
CLOCK
If the power supply is cut (battery
disconnected, supply wire cut, etc.),
the clock must be reset.
We recommend that you do not
adjust these settings while driving.
A
1
3
B
2
To Next Page
Loading...
