1.18
FRONT SEATS
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.
We would advise you not to recline
the seatbacks too far to ensure that
the effectiveness of the seat belts
is not reduced.Nothing should be
placed on the floor (area in front of
driver) as such objects may slide
under the pedal during braking ma-
noeuvres, thus obstructing its use.
Move forward or backward
Lift the lever 1 to move the seat forward
or backward.Release the lever 1 in de-
sired position of seat and ensure that
the seat is fully locked into place.
To adjust the seat height
Lift the knob 2 upward to adjust the seat
height and release the knob in the de-
sired height.Ensure seat is locked pro-
perly after release.
1
2
To tilt the seatback
Lift the knob 3 upward to unlock recliner
mechanism.Tilt the seat back to desired
position and release knob. Ensure seat
back is locked properly after release.
3
To Next Page
Loading...
