5.6
Refitting the Carwheel
By aligning one of the hole in the wheels
to the hole in the wheel drum/disc.
Keep the wheel cover (on select vari-
ants) and wheel bolts handy, place and
hold the wheel cover to align with the
wheel holes.
CHANGING A WHEEL (2/2)
Using the wrench, tighten the bolts
evenly. Uncrank (release) the jack using
wheel wrench till the jack becomes free
from holding the vehicle anymore.
Now tighten the wheel bolts completely.
Place the punctured or removed wheel-
inside the spare wheel storage location
and screw the spare wheel lock to hold
the spare wheel tight.
Place the wheel wrench and jack in the
same location.
If the vehicle is parked on
the hard shoulder, you must
warn other road users of
your vehicle’s presence
with a warning triangle or with other
devices as per the legislation apply-
ing to the country you are in.
If you have a puncture, re-
place the wheel as soon
as possible.A tyre which
has been punctured should
always be inspected (and repaired,
where possible) by a specialist.”
To Next Page
Loading...
